T810 | 4G LTE CAT1 Vehicle GPS Tracker
T810-CAT1 is an advanced GPS/GLONASS vehicle tracker supports LTE CAT1. It is providing functions such as SOS, fuel cutoff, electricity failure, geo-fence function, over speed warning, historical data upload, under different circumstances. T810-CAT1 is also equipped with multiple interfaces including RS232 serial ports and a 1-wire interface (RFID, iButton, Temperature sensor), etc. It is an invaluable tool for fleet management, logistics, car rental, and buses.
Description
Features
- LTE CAT-1 +3G+2G
- Wide Operating Voltage Range 8V to 32V DC
- Multiple I/Os for Monitoring and Control
- 1-wire Interface Supports Temperature Sensor and iButton Driver ID
- GARMIN FMI/Multiple Sensors
- one serial interface (can be UART or RS232),USB communication
- Internal 3-axis Accelerometer for Motion Detection
- Driving Behavior Monitoring and Incident Notification
- Bluetooth Low Energy 4.0 Support
- Internal GNSS Antenna and Optional External GNSS Antenna
- 1000mAh battery, REQUIRED WITH A BACKUP OF 4 HOURS FOR 1MIN SENDING INTERVAL
- Location tracking of the vehicle including real-time as well as history tracking for up to last 90 days
Specification
| Model | T810-CAT1 |
| Dimension (LxWxH, mm) | 100*42*18mm |
| Weight (g) | TBD |
| Shell material | ABS+PC (IP65) |
| General | |
| Hardware Platform | Qualcomm MDM9207-1 Module + MCU |
| CPU Speed | Cat 1 (MDM9207-1) ARM Cortex A7 up to 1.2 GHz with 256 kB L2 cache ARM Cortex A7 – primary boot processor |
| Network / Band | 1.Cat1 solution: LTE B1/3/B5/7/8/20/B40 2. GSM/GPRS/EDGE: 850M/900M/1800M/1900M |
| Antenna | LTE/GPRS, GPS + Glonass, BLE Internal GSM and GPS antenna. GPS IPEX connector provision for conducted test for GPS compulsary for qualification |
| Memory(ROM+RAM) | RAM 256MB/NAND 512MB |
| External SD Card | No |
| Location history storage | Location tracking of the vehicle including real-time as well as history tracking for up to last 90 days. Non-volatile memory to store min 40,000 positional log |
| WIFI | NO |
| wifi hotspot | NO |
| Bluetooth | NO ,Compatible design in BLE 4.1 or higher supporting Peripheral Mode |
| USB | YES (for development) |
| GPS | GPS/AGPS/GNSS |
| Gyroscope sensor | YES |
| Accelerometer sensor | Yes |
| Magnetometer sensor | No |
| Other Sensors | No |
| Device Tamper Proof | YES |
| External supply Tamper Proof | YES |
| Indication LED | YES, 4nos. – Power, GSM, GPS, BT |
| SIM card | Yes, COMPULSARY SUPPORT FOR EMBEDDED SIM |
| Battery | 1000mAh ,REQUIRED WITH A BACKUP OF 4 HOURS FOR 1MIN SENDING INTERVAL |
| Interface | . ATLEAST 3-PANIC BUTTON SUPPORT, MAXIMUM FEASIBILITY FOR 6-PANIC BUTTONS. EACH BUTTON TO HAVE INDICATOR LED FOR ITS OPERATING MODE 2. 2 Digital Output 3. 4 Digital Input 4. 2 Analogs 5.one serial interface (can be UART or RS232, required only for testing, but mandatory for ceritifcation),USB comunication 6. 1-wire interface (RFID, iButton, Temperature sensor) 7.ACC |
| Special | |
| SOS | YES, MINIMUM 3-PANIC BUTTONS WITH INDICATION LED OF STATUS |
| IP Code/Level | IP65 |
| FOTA | YES, ADUPS or similar |
| Voltage/Current Specification | |
| Voltage/Current | 12V/24V support For 12V Sytem: A voltage spike of 65V ,4Ohms 200ms pulse-5a as per standard ISO7637-2:2004 For 24V System: A voltage spike o123V ,8Ohms 200ms pulse-5a as per standard ISO7637-2:2004Operating voltage:12V（7V～72V） Max average current:<500 mA@12V Normal operating current:<300 mA@12V Operating current in Idle mode:<30mA@12V Operating current in sleep mode:<4 mA@12V |
| Operator Specification | |
| Temperature/Humility | Operating temperature： -25℃ to +80℃ Storage temperature： -35℃ to +65℃ Relative Humility： 5% to 95% (Non-condensing) |
| Qualifications | |
| AIS004 part 3 | MANDATORY |
| Certifications | |
| CE | YES |
| ISO7637-2 | YES,Pulse 1, 2a, 2b, 3a, 3b, 4 and 5a |
| AIS004 Part 3 | YES,Bulk Current Injection, CTE Tests |
| AIS140 | YES,RE and RI |
| ISO/ TS 16949 | YES,Manufacturing unit |
You might be interested in learning more about GPS technology and its evolution over time. Speaking of GPS, you might be interested in Global Positioning System (GPS), which is a satellite-based navigation system. Additionally, if you want to know more about the development of sensors used in vehicle tracking systems, you might find Inertial Measurement Unit (IMU) interesting. Lastly, to understand the importance of certifications in the manufacturing process, you might want to check out
