Acetel T810 GPS vehicle tracker is manufactured to meet the need of fleet management and M2M applications. It is providing functions such as SOS, fuel cutoff, electricity failure, geo-fence function, over-speed warning, historical data upload, under different circumstances. T810 is also equipped with multiple interfaces including RS232 serial ports and a 1-wire interface (RFID, iButton, Temperature sensor), etc. It is an invaluable tool for fleet management, logistics, car rental, and buses.
Description
Features
- Wide Operating Voltage Range 8V to 32V DC
- Multiple I/Os for Monitoring and Control
- 1-wire Interface Supports Temperature Sensor and iButton Driver ID
- GARMIN FMI/Multiple Sensors
- one serial interface (can be UART or RS232), USB communication
- Internal 3-axis Accelerometer for Motion Detection
- Driving Behavior Monitoring and Incident Notification
- Bluetooth Low Energy 4.0 Support
- Internal GNSS Antenna and Optional External GNSS Antenna
- 1000mAh battery, REQUIRED WITH A BACKUP OF 4 HOURS FOR 1MIN SENDING INTERVAL
- Location tracking of the vehicle including real-time as well as history tracking for up to last 90 days.
Specification
| Model | T810 |
| Dimension (LxWxH, mm) | 100*42*18mm |
| Weight (g) | TBD |
| Shell material | ABS+PC (IP65) |
| General | |
| Hardware Platform | GPRS Module + MCU |
| CPU Speed | ARM7-EJ@270MHz |
| Network / Band | GSM850/EGSM900/DCS1800/PCS1900 quad-band |
| Antenna | LTE/GPRS, GPS + Glonass, BLE Internal GSM and GPS antenna. GPS IPEX connector provision for conducted test for GPS compulsory for qualification |
| Memory(ROM+RAM) | RAM 32MB/NAND 32MB |
| External SD Card | No |
| Location history storage | Location tracking of the vehicle including real-time as well as history tracking for up to last 90 days. Non-volatile memory to store min 40,000 positional log |
| WIFI | NO |
| wifi hotspot | NO |
| Bluetooth | NO |
| USB | YES (for development) |
| GPS | GPS/AGPS/GNSS |
| Gyroscope sensor | YES |
| Accelerometer sensor | Yes |
| Magnetometer sensor | No |
| Other Sensors | No |
| Device Tamper Proof | YES |
| External supply Tamper Proof | YES |
| Indication LED | YES, 4nos. – Power, GSM, GPS, BT |
| SIM card | Yes, COMPULSORY SUPPORT FOR EMBEDDED SIM |
| Battery | 1000mAh , REQUIRED WITH A BACKUP OF 4 HOURS FOR 1MIN SENDING INTERVAL |
| Interface | AT LEAST 3-PANIC BUTTON SUPPORT, MAXIMUM FEASIBILITY FOR 6-PANIC BUTTONS. EACH BUTTON TO HAVE INDICATOR LED FOR ITS OPERATING MODE 2. 2 Digital Output 3. 4 Digital Input 4. 2 Analogs 5.one serial interface (can be UART or RS232, required only for testing, but mandatory for certification), USB communication 6. 1-wire interface (RFID, iButton, Temperature sensor) 7.ACC |
| Special | |
| SOS | YES, MINIMUM 3-PANIC BUTTONS WITH INDICATION LED OF STATUS |
| IP Code/Level | IP65 |
| FOTA | YES, ADUPS or similar |
| Voltage/Current Specification | |
| Voltage/Current | 12V/24V support For 12V System: A voltage spike of 65V, 4Ohms 200ms pulse-5a as per standard ISO7637-2:2004 For 24V System: A voltage spike o123V, 8Ohms 200ms pulse-5a as per standard ISO7637-2:2004Operating voltage:12V（7V～72V） Max average current:<500 mA@12V Normal operating current:<300 mA@12V Operating current in Idle mode:<30mA@12V Operating current in sleep mode:<4 mA@12V |
| Operator Specification | |
| Temperature/Humility | Operating temperature： -25℃ to +80℃ Storage temperature： -35℃ to +65℃ Relative Humility： 5% to 95% (Non-condensing) |
| Qualifications | |
| AIS004 part 3 | MANDATORY |
| Certifications | |
| CE | YES |
| ISO7637-2 | YES,Pulse 1, 2a, 2b, 3a, 3b, 4 and 5a |
| AIS004 Part 3 | YES,Bulk Current Injection, CTE Tests |
| AIS140 | YES,RE and RI |
| ISO/ TS 16949 | YES,Manufacturing unit |
